View NCP553SQ27T1_504958.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

NCP552, NCP553, NCV553 80 mA CMOS Low Iq NOCAPE Voltage Regulator
This series of fixed output NOCAP linear regulators are designed for handheld communication equipment and portable battery powered applications which require low quiescent. This series features an ultra-low quiescent current of 2.8 mA. Each device contains a voltage reference unit, an error amplifier, a PMOS power transistor, resistors for setting output voltage, current limit, and temperature limit protection circuits. The NCP552 series provides an enable pin for ON/OFF control. These voltage regulators have been designed to be used with low cost ceramic capacitors. The devices have the ability to operate without an output capacitor. The devices are housed in the micro-miniature SC82-AB surface mount package. Standard voltage versions are 1.5, 1.8, 2.5, 2.7, 2.8, 3.0, 3.3, and 5.0 V. Other voltages are available in 100 mV steps.
Features
http://onsemi.com
4 1 SC82-AB (SC70-4) SQ SUFFIX CASE 419C
* * * * * * * * * *
Pb-Free Packages are Available* Low Quiescent Current of 2.8 mA Typical Low Output Voltage Option Output Voltage Accuracy of 2.0% Industrial Temperature Range of -40C to 85C (NCV553, TA = -40C to +125C) NCP552 Provides an Enable Pin Battery Powered Consumer Products Hand-Held Instruments Camcorders and Cameras NCV Prefix for Automotive and Other Applications Requiring Site and Control Changes
GND Enable OFF Input Vin C1 + Vout + C2 Output ON
PIN CONNECTIONS & MARKING DIAGRAMS
GND 1 xxxM Vin 2
4 Enable
3 Vout
Typical Applications
(NCP552 Top View)
GND 1 xxxM Vin 2
4 N/C
3 Vout
(NCP553, NCV553 Top View) xxx = Device Code M = Date Code
This device contains 32 active transistors
ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 8 of this data sheet.
Figure 1. NCP552 Typical Application Diagram
GND Input Vin C1 + Vout + C2 N/C Output
*For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
This device contains 32 active transistors
Figure 2. NCP553 Typical Application Diagram
(c) Semiconductor Components Industries, LLC, 2004
1
September, 2004 - Rev. 5
Publication Order Number: NCP552/D
NCP552, NCP553, NCV553
A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AAA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAA A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AAAAAAAAAAAAAAAAAAAAAAAA A A AAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAA AA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAA AA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
PIN FUNCTION DESCRIPTION
NCP552 1 2 3 4 NCP553 1 2 3 Pin Name GND Vin Description Power supply ground. Positive power supply input voltage. Regulated output voltage. Vout - 4 Enable N/C This input is used to place the device into low-power standby. When this input is pulled low, the device is disabled. If this function is not used, Enable should be connected to Vin. No internal connection. -
MAXIMUM RATINGS
Rating Input Voltage
Symbol Vin
Value 12
Unit V V V
A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A A A A A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A A A AA A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAA A A A A A A AAAAAAAAAAAAAAAAAAAAAAAA AAAA A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A A A AAAA A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAA A A
Enable Voltage (NCP552 ONLY) Output Voltage Enable Vout -0.3 to Vin +0.3 -0.3 to Vin +0.3 Power Dissipation and Thermal Characteristics Power Dissipation Thermal Resistance, Junction-to-Ambient Operating Junction Temperature Operating Ambient Temperature NCP552, NCP553 NCV553 Storage Temperature PD RqJA TJ Internally Limited 400 +125 W C/W C C TA -40 to +85 -40 to +125 Tstg -55 to +150 C Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. This device series contains ESD protection and exceeds the following tests: Human Body Model 2000 V per MIL-STD-883, Method 3015 Machine Model Method 200 V 2. Latch up capability (85C) "200 mA DC with trigger voltage.
http://onsemi.com
2
NCP552, NCP553, NCV553
ELECTRICAL CHARACTERISTICS (Vin = Vout(nom.) + 1.0 V, Venable = Vin, Cin = 1.0 mF, Cout = 1.0 mF, TJ = 25C, unless
otherwise noted.) Characteristic Output Voltage (TA = 25C, Iout = 10 mA) 1.5 V 1.8 V 2.5 V 2.7 V 2.8 V 3.0 V 3.3 V 5.0 V Output Voltage (TA = -40C to 85C, Iout = 10 mA) 1.5 V 1.8 V 2.5 V 2.7 V 2.8 V 3.0 V 3.3 V 5.0 V Output Voltage (TA = -40C, Iout = 10 mA) NCV553 -5.0 V Output Voltage (TA = +125C, Iout = 10 mA) NCV553 -5.0 V Line Regulation (Vin = Vout + 1.0 V to 12 V, Iout = 10 mA) Load Regulation (Iout = 1.0 mA to 80 mA, Vin = Vout + 2.0 V) Output Current (Vout = (Vout at Iout = 80 mA) -3.0%) 1.5 V-3.9 V (Vin = Vout(nom.) + 2.0 V) 4.0 V-5.0 V (Vin = 6.0 V) Dropout Voltage (TA = -40C to 125C, Iout = 80 mA, Measured at Vout -3.0%) 1.5 V 1.8 V 2.5 V 2.7 V 2.8 V 3.0 V 3.3 V 5.0 V Quiescent Current (Enable Input = 0 V) (Enable Input = Vin, Iout = 1.0 mA to Io(nom.), Vin = Vout +2.0 V) Output Short Circuit Current (Vout = 0 V) 1.5 V-3.9 V (Vin = Vout(nom.) + 2.0 V) 4.0 V-5.0 V (Vin = 6.0 V) Output Voltage Noise (f = 20 Hz to 100 kHz, Iout = 10 mA) (Cout = 1.0 mF) Enable Input Threshold Voltage (NCP552 ONLY) (Voltage Increasing, Output Turns On, Logic High) (Voltage Decreasing, Output Turns Off, Logic Low) Output Voltage Temperature Coefficient 3. Maximum package power dissipation limits must be observed. T *TA PD + J(max) RqJA 4. Low duty cycle pulse techniques are used during testing to maintain the junction temperature as close to ambient as possible. Symbol Vout 1.455 1.746 2.425 2.646 2.744 2.94 3.234 4.900 Vout 1.455 1.746 2.425 2.619 2.716 2.910 3.201 4.900 Vout Vout Regline Regload Io(nom.) 80 80 Vin-Vout - - - - - - - - IQ - - Iout(max) 100 100 Vn Vth(en) 1.3 - TC - - - "100 - 0.3 - ppm/C - 300 300 90 450 450 - mVrms V 0.1 2.8 1.0 6.0 mA 1300 1100 800 750 730 680 650 470 1800 1600 1400 1200 1200 1000 1000 800 mA 180 180 - - mV 4.900 4.850 - - 1.5 1.8 2.5 2.7 2.8 3.0 3.3 5.0 5.0 5.0 2.0 0.3 1.545 1.854 2.575 2.781 2.884 3.09 3.399 5.100 5.100 5.150 4.5 0.8 V V mV/V mV/mA mA 1.5 1.8 2.5 2.7 2.8 3.0 3.3 5.0 1.545 1.854 2.575 2.754 2.856 3.06 3.366 5.100 V Min Typ Max Unit V
http://onsemi.com
3
NCP552, NCP553, NCV553
DEFINITIONS
Load Regulation Line Regulation
The change in output voltage for a change in output current at a constant temperature.
Dropout Voltage
The input/output differential at which the regulator output no longer maintains regulation against further reductions in input voltage. Measured when the output drops 3.0% below its nominal. The junction temperature, load current, and minimum input supply requirements affect the dropout level.
Maximum Power Dissipation
The change in output voltage for a change in input voltage. The measurement is made under conditions of low dissipation or by using pulse technique such that the average chip temperature is not significantly affected.
Line Transient Response
Typical over and undershoot response when input voltage is excited with a given slope.
Thermal Protection
The maximum total dissipation for which the regulator will operate within its specifications.
Quiescent Current
The quiescent current is the current which flows through the ground when the LDO operates without a load on its output: internal IC operation, bias, etc. When the LDO becomes loaded, this term is called the Ground current. It is actually the difference between the input current (measured through the LDO input pin) and the output current.
Internal thermal shutdown circuitry is provided to protect the integrated circuit in the event that the maximum junction temperature is exceeded. When activated at typically 160C, the regulator turns off. This feature is provided to prevent failures from accidental overheating.
Maximum Package Power Dissipation
The maximum power package dissipation is the power dissipation level at which the junction temperature reaches its maximum operating value, i.e. 125C. Depending on the ambient power dissipation and thus the maximum available output current.
http://onsemi.com
4
NCP552, NCP553, NCV553
Vin - Vout, DROPOUT VOLTAGE (VOLTS) 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -50 -25 0 25 50 75 100 125 40 mA 80 mA Vout, OUTPUT VOLTAGE (VOLTS) Vout(nom.) = 3.0 V 3.03 Vout(nom.) = 3.3 V 3.025 Iout = 5 mA 3.02 3.015 3.01 3.005 3 -60 Vin = 4 V Vin = 12 V
-40
-20
0
20
40
60
80
100
TEMPERATURE (_C)
TEMPERATURE (_C)
Figure 3. Dropout Voltage versus Temperature
Figure 4. Output Voltage versus Temperature
3.25 Iq, QUIESCENT CURRENT (mA) 3 2.75 2.5 2.25 2 1.75 -60 Iq, QUIESCENT CURRENT (mA) Iout = 0 mA Vin = 4 V
4.5 4 3.5 3 2.5 2 1.5 1 0.5 0 -40 -20 0 20 40 60 80 100 0 2 4 6 8 10 12 TEMPERATURE (_C) Vin, INPUT VOLTAGE (VOLTS) Vout(nom.) = 3 V Iout = 0 mA
Figure 5. Quiescent Current versus Temperature
Figure 6. Quiescent Current versus Input Voltage
Vin, INPUT VOLTAGE (V)
4 3.5 OUTPUT NOISE (mV/ Hz) 3 2.5
6 5 4 200 100 0 -100 Iout = 1 mA Cout = 1 mF
1.5 1 0.5 0 10 100 1000 10000 100000 50 mA
OUTPUT VOLTAGE DEVIATION (mV) 1000000
2
10 mA
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
FREQUENCY (Hz)
TIME (ms)
Figure 7. Output Noise Density
Figure 8. Line Transient Response
http://onsemi.com
5
NCP552, NCP553, NCV553
OUTPUT VOLTAGE DEVIATION (mV) 600 400 200 0 Vin = 4 V Cout = 10 mF OUTPUT VOLTAGE DEVIATION (mV) 200 0
-200 -400 100 50 0 -50
Vin = 4 V Cout = 10 mF
Iout, OUTPUT CURRENT (mA)
100 50 0 0 10 20 30 40
Iout, OUTPUT CURRENT (V)
150
50
0
0.5
1 TIME (ms)
1.5
2
TIME (ms)
Figure 9. Load Transient Response
Figure 10. Load Transient Response
ENABLE VOLTAGE (V)
3.5 5 0 Vout, OUTPUT VOLTAGE (VOLTS) 3 2.5 2 1.5 1 0.5 0 500 600 700 0 2 4 6 8 10 12 Vin, INPUT VOLTAGE (VOLTS) Cin = 1 mF Cout = 1 mF TA = 25 _C
OUTPUT VOLTAGE (V)
3 2 1 0 0 100 200 Iout = 10 mA Cin = 1 mF Cout = 0.1 mF Vin = 4 V 300 400
TIME (ms)
Figure 11. Turn-On Response (NCP552 ONLY)
Figure 12. Output Voltage versus Input Voltage
http://onsemi.com
6
NCP552, NCP553, NCV553
APPLICATIONS INFORMATION A typical application circuit for the NCP552 series and NCP553 series is shown in Figure 1 and Figure 2, front page.
Input Decoupling (C1)
A 1.0 mF capacitor either ceramic or tantalum is recommended and should be connected close to the package. Higher values and lower ESR will improve the overall line transient response. If large line or load transients are not expected, then it is possible to operate the regulator without the use of a capacitor. TDK capacitor: C2012X5R1C105K, or C1608X5R1A105K
Output Decoupling (C2)
chance to pick up noise or cause the regulator to malfunction. Set external components, especially the output capacitor, as close as possible to the circuit, and make leads as short as possible.
Thermal
The NCP552 and NCP553 are very stable regulators and do not require any specific Equivalent Series Resistance (ESR) or a minimum output current. If load transients are not to be expected, then it is possible for the regulator to operate with no output capacitor. Otherwise, capacitors exhibiting ESRs ranging from a few mW up to 10 W can thus safely be used. The minimum decoupling value is 0.1 mF and can be augmented to fulfill stringent load transient requirements. The regulator accepts ceramic chip capacitors as well as tantalum devices. Larger values improve noise rejection and load regulation transient response. TDK capacitor: C2012X5R1C105K, C1608X5R1A105K, or C3216X7R1C105K
Enable Operation (NCP552 ONLY)
As power across the NCP552 and NCP553 increases, it might become necessary to provide some thermal relief. The maximum power dissipation supported by the device is dependent upon board design and layout. Mounting pad configuration on the PCB, the board material and also the ambient temperature effect the rate of temperature rise for the part. This is stating that when the devices have good thermal conductivity through the PCB, the junction temperature will be relatively low with high power dissipation applications. The maximum dissipation the package can handle is given by:
T *TA PD + J(max) RqJA
If junction temperature is not allowed above the maximum 125C, then the NCP552 and NCP553 can dissipate up to 250 mW @ 25C. The power dissipated by the NCP552 and NCP553 can be calculated from the following equation:
Ptot + [Vin * Ignd (Iout)] ) [Vin * Vout] * Iout
The enable pin will turn on the regulator when pulled high and turn off the regulator when pulled low. These limits of threshold are covered in the electrical specification section of this data sheet. If the enable is not used then the pin should be connected to Vin.
Hints
or
P ) Vout * Iout VinMAX + tot Ignd ) Iout
Please be sure the Vin and GND lines are sufficiently wide. When the impedance of these lines is high, there is a
If an 80 mA output current is needed then the ground current from the data sheet is 2.8 mA. For an NCP552 or NCP553 (3.0 V), the maximum input voltage will then be 6.12 V.
http://onsemi.com
7
NCP552, NCP553, NCV553
ORDERING INFORMATION
Nominal Output Voltage (Note 5) 1.5 1.8 2.5 2.7 2.8 3.0 3.3 5.0 1.5 1.8 2.5 2.7 2.8 3.0 3.3 5.0 1.5 3.0 5.0
Device NCP552SQ15T1 NCP552SQ18T1 NCP552SQ25T1 NCP552SQ27T1 NCP552SQ28T1 NCP552SQ30T1 NCP552SQ33T1 NCP552SQ50T1 NCP553SQ15T1 NCP553SQ18T1 NCP553SQ25T1 NCP553SQ27T1 NCP553SQ28T1 NCP553SQ30T1 NCP553SQ33T1 NCP553SQ50T1 NCP553SQ15T1G NCP553SQ30T1G NCV553SQ50T1 (Note 6)
Marking LAW LAX LAY LAZ LBA LBB LBC LBD LBE LBF LBG LBH LBI LBJ LBK LBL LBE LBJ LFT
Package
Shipping
SC82 AB SC82-AB (SC70-4) 3000 Units/ 8 Tape & Reel
(Pb-Free) SC82-AB (SC70-4)
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. 5. Additional voltages in 100 mV steps are available upon request by contacting your ON Semiconductor representative. 6. Automotive qualified.
http://onsemi.com
8
NCP552, NCP553, NCV553
PACKAGE DIMENSIONS
SC82-AB (SC70-4) SQ SUFFIX CASE 419C-02 ISSUE C
A G D 3 PL
4 3
C N
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. 419C-01 OBSOLETE. NEW STANDARD IS 419C-02. 4. DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. DIM A B C D F G H J K L N S MILLIMETERS MIN MAX 1.8 2.2 1.15 1.35 0.8 1.1 0.2 0.4 0.3 0.5 1.1 1.5 0.0 0.1 0.10 0.26 0.1 --- 0.05 BSC 0.2 REF 1.8 2.4 INCHES MIN MAX 0.071 0.087 0.045 0.053 0.031 0.043 0.008 0.016 0.012 0.020 0.043 0.059 0.000 0.004 0.004 0.010 0.004 --- 0.002 BSC 0.008 REF 0.07 0.09
S
1 2
B
K
F L
H J 0.05 (0.002)
http://onsemi.com
9
NCP552, NCP553, NCV553
NOCAP is a trademark of Semiconductor Components Industries, LLC.
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082-1312 USA Phone: 480-829-7710 or 800-344-3860 Toll Free USA/Canada Fax: 480-829-7709 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Phone: 81-3-5773-3850 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative.
http://onsemi.com
10
NCP552/D

▲Up To Search▲

Price & Availability of NCP553SQ27T1

	To Download NCP553SQ27T1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .